Care Guide

Caring for
Your Lamp

A LampAndGlow piece is built to last decades — not seasons. A little care goes a long way in keeping the wood alive and the light warm.

"Our lamps are made from solid sheesham and teak — both naturally dense, oil-rich hardwoods. They don't need much. Dust them, keep them dry, oil them once a year, and they'll outlive the room they're in."

— LampAndGlow Workshop, Karachi

01. Daily Care

Solid wood lamps require very little day-to-day attention. The main enemies are dust build-up, moisture from humid environments, and prolonged direct sunlight.

✓ Do

  • Dust weekly with a soft, dry microfibre cloth
  • Keep in a well-ventilated space
  • Use a lampshade to diffuse heat from the bulb
  • Place on a stable, level surface

✗ Don't

  • Place near open windows during rain
  • Use wet cloths directly on the wood base
  • Place directly on marble or stone without felt pads
  • Leave dusty for extended periods

02. Cleaning the Wood

Occasional deeper cleaning keeps the wood looking fresh. Follow this method for the best results without damaging the finish.

01

Unplug the lamp

Always disconnect from power before cleaning any part of the lamp.

02

Dry dust first

Use a soft brush or dry microfibre cloth to remove surface dust before introducing any moisture.

03

Barely damp cloth

If needed, barely dampen a cloth with plain water — wring it out fully so it feels almost dry to the touch.

04

Wipe with the grain

Wipe gently in the direction of the wood grain. Never scrub across it.

05

Dry immediately

Follow with a completely dry cloth. Never leave moisture sitting on the surface.

06

No cleaners or sprays

Avoid all chemical cleaners, furniture polish sprays, alcohol, bleach, or anything not specifically designed for oiled wood.

03. Oiling the Wood

Our lamps leave the workshop with a tung oil or beeswax finish. This needs refreshing once or twice a year to keep the wood nourished, protected, and deep in colour.

What to use

Tung Oil

Pure tung oil or Danish oil. Apply sparingly with a lint-free cloth, leave 30 minutes, buff off excess.

Beeswax

Natural beeswax furniture paste. Apply a thin layer, leave 15 minutes, buff to a soft sheen with a clean cloth.

Varnished

For lacquered finishes — simply clean and leave. Do not oil over varnish; it won't absorb.

How often?

Once a year in normal conditions. Twice a year if you're in a very dry climate (e.g. air-conditioned rooms year-round) or if the wood starts to look dull or thirsty.

04. Light & Heat

Sunlight

Prolonged direct sunlight will fade and dry out even the densest hardwood over time. Position your lamp away from south-facing windows or use sheer curtains to filter UV. This is the most common cause of premature ageing.

Heat Sources

Keep lamps away from direct heating vents, radiators, and fireplaces. Dry heat causes wood to crack along the grain over time. Always use a lampshade — it diffuses heat from the bulb and protects the upper part of the base.

Humidity

Wood expands in humidity and contracts in dry air. Avoid placing lamps in bathrooms, near kitchen steam, or outdoors. Minor seasonal movement is normal and harmless — large cracks are caused by sudden temperature changes, not gradual seasonal shifts.

05. Bulb Guide

The right bulb makes a huge difference — both to the look of your lamp and the life of the wood around the socket.

Recommended Bulbs

LED Edison (E27)

4–8W

Best choice. Low heat, warm amber tone (2200–2700K), long life. Looks spectacular in a wooden lamp.

LED Filament

4–6W

Decorative, visible filament. Great if your shade is transparent. Very low heat.

LED Globe

6–9W

Good for shaded table lamps where the bulb shape isn't visible.

Halogen (avoid)

40–60W

Generates significant heat. Can dry out wood and warp shades. Not recommended.

Incandescent (avoid)

60W+

Too hot for most wooden lamp sockets. Shortens wire life and dries wood.

Colour Temperature

For wooden lamps, always choose 2200K–2700K (warm white). Cool white (4000K+) fights the warmth of the wood and kills the aesthetic.

06. Seasonal Care in Pakistan

Summer (May–Sep)

Karachi summers are hot and occasionally humid near the coast. Run AC moderately — constant low humidity from AC is as damaging as high humidity. Oil your lamp at the start of summer.

Monsoon (Jul–Sep)

Keep lamps away from open windows. If the room gets noticeably damp, run a dehumidifier. Wipe any condensation immediately — don't let it sit.

Winter (Nov–Feb)

Dry air is the concern in winter, especially with heaters running. Check if the wood feels dull — if so, a light coat of oil will restore it. This is the ideal time for the annual oiling.

Dust Storms

Karachi and much of Pakistan see periodic dust storms. If you know one is coming, cover your lamp with a cloth. Dust particles are abrasive to wood finishes over time.

07. Scratches & Repairs

Minor scratches and dents are part of a lamp's story — but if you want to address them:

Light surface scratch

Rub a walnut or pecan kernel along the scratch — the natural oils fill and mask it. Sounds strange, works brilliantly.

Deeper scratch

Sand very lightly along the grain with 240-grit sandpaper. Wipe clean, then re-oil the affected area.

Small dent

Wet a cloth, place over the dent, and press a warm (not hot) iron over it briefly. Steam causes the compressed fibres to swell back.

White water ring

Rub gently with a cloth dampened with a small amount of olive oil and white vinegar (equal parts). Dry immediately.

Loose joint

Apply a small amount of wood glue, clamp for 24 hours. For structural issues or electrical concerns, contact us for warranty assessment.

Under warranty?

Manufacturing defects are covered for 2 years. Contact us before attempting repairs on a warranty claim.

Warranty Support

Care at a Glance

Dust

Weekly, dry cloth

Deep clean

Barely damp → dry immediately

Oil

Once a year (tung oil or beeswax)

Bulb

LED Edison, 4–8W, 2200–2700K

Sunlight

Avoid prolonged direct exposure

Moisture

Keep dry at all times

Warranty

2 years, manufacturing defects

Questions

support@lampandglow.com